8-Bit MCU |
Part
No. |
Application Note Description |
Associated Files |
| HA0001E |
MCU Software Stack Application |
.zip |
| HA0002E |
Reading Larger than Usual MCU Tables |
.zip |
| HA0003E |
Communicating between the HT48 & HT46
Series MCUs and the HT93LC46 EEPROM |
.zip |
| HA0004E |
HT48 & HT46 MCU UART Software Implementation Method |
.zip |
| HA0005E |
Controlling the I2C bus with the HT48 & HT46 MCU
Series |
.zip |
|
HA0006E |
Using MCU Indirect Addressing |
-- |
|
HA0007E |
Using the MCU Look Up Table Instructions |
-- |
|
HA0008E |
Watchdog Timer Setup for the HT49 MCU |
-- |
|
HA0009E |
HT48 & HT46 MCU I/O Port Application - Rolling LED Light Display |
.zip |
|
HA0010E |
HT48 & HT46 Traffic Light Controller |
.zip |
|
HA0011E |
HT48 & HT46 Keyboard Scan Program |
.zip |
|
HA0013E |
HT48 & HT46 LCM Interface Design |
.zip |
|
HA0014E |
MCU Addition, Subtraction, Multiplication and Division Functions |
.zip |
|
HA0016E |
Writing and Reading to the HT24 EEPROM with the HT48 MCU
Series |
.zip |
|
HA0017E |
Controlling the
Read/Write Function of the HT24 Series EEPROM Using the HT49
Series MCUs |
.zip |
| HA0018E |
Controlling the HT1621 LCD Controller with the HT48 MCU Series |
.zip |
|
HA0019E |
Using the Watchdog Timer in the HT48 MCU Series |
.zip |
|
HA0020E |
Using the Timer/Event Counter in the HT48 MCU Series |
.zip |
|
HA0021E |
Using the I/O Ports on the HT48 MCU Series |
.zip |
|
HA0022E |
Distinguishing between the Different Devices in the HT48 MCU
Series |
-- |
|
HA0023E |
Using the Buzzer Function on the HT49 MCU Series |
.zip |
|
HA0024E |
Using the RTC in the HT49 MCU Series |
.zip |
|
HA0025E |
Using the Time Base in the HT49 MCU Series |
.zip |
|
HA0026E |
Using the I/O Ports on the HT49 MCU Series |
.zip |
|
HA0027E |
Using the Timer/Event Counter in the HT49 MCU Series |
.zip |
|
HA0028E |
Using the Watchdog Timer in the HT47R20A-1 |
-- |
|
HA0029E |
Using the Time Base Function in the HT47R20A-1 |
.zip |
|
HA0030E |
Using the RTC in the HT47R20A-1 |
.zip |
|
HA0031E |
Using the Timer/Event Counter in the HT47R20A-1 |
.zip |
|
HA0032E |
An Introduction to the A/D function in the HT47R20A-1 |
.zip |
|
HA0033E |
Using the I/Os in the HT47R20A-1 |
.zip |
|
HA0034E |
Using the Buzzer Function in the HT47R20A-1 |
.zip |
|
HA0035E |
HT47R20A-1 Infra-red Carrier Output Introduction |
.zip |
|
HA0036E |
Using the PFD Function in the HT47R20A-1 |
.zip |
|
HA0039E |
Using the PFD Function in the HT49 MCU Series |
.zip |
|
HA0044E |
Reading and Writing to the HT93LC46 with the HT49 MCU Series |
.zip |
|
HA0045E |
Distinguishing between the Different Devices in the HT47 MCU
Series |
-- |
|
HA0046E |
Using the C-compiler for Holtek MCUs |
-- |
|
HA0047E |
An PWM application example using the HT46 series of MCUs |
-- |
|
HA0048E |
Using the A/D in the HT46 MCU Series |
.zip |
|
HA0049E |
Read and Write Control of the HT1380 |
.zip |
|
HA0051E |
Li Battery Charger Demo Board - Using
the HT46R47 |
-- |
|
HA0052E |
Microcontroller Application - Battery Charger |
-- |
|
HA0075E |
MCU Reset and Oscillator Circuits Application
Note |
-- |
|
HA0076E |
HT48RAx/HT48CAx Software Application Note |
-- |
|
HA0082E |
HT48xA0-1
and HT48xA0-2 Power-on Reset Timing |
-- |
|
HA0083E |
Li Battery Charger Demo Board - Using
the HT46R46 |
.zip |
|
HA0084E |
NiMH Battery Charger Demo Board - Using the HT46R52A |
.zip |
|
HA0085E |
8-bit Pseudo-Random Number Generator |
.zip |
|
HA0091E |
HT48RA0A/HT48RA0-1/HT48RA0-2
PL Lamp Driver |
.zip |
|
HA0092E |
Using General I/O Ports to Drive LCD Displays
|
.zip |
|
HA0095E |
HT46R14A Single Phase AC Induction Motor Frequency Converter Application |
.zip |
|
HA0096E |
Password Door Lock
|
.zip |
|
HA0097E |
Using the HT46R53 to charge Nickel-Metal Hydride Batteries
|
.zip |
|
HA0098E |
HT49R50A-1 Using a thermistor to implement a thermometer
|
.zip |
|
HA0099E |
Using the HT48R10-1 BZ to Generate a 32768Hz Crystal Frequency
|
.zip |
|
HA0100E |
HT45R02 LED Thousand Year Calendar
|
.zip |
|
HA0101E |
Using the HT46R12A in an Induction Cooker |
-- |
|
HA0102E |
Using the HT46R14A in a CCFL Lamp Inverter |
-- |
|
HA0103E |
Using C language to write and read to the HT1621 using the HT48 and HT46 MCU series |
.zip |
|
HA0104E |
Using the HT82M99E to Implement an RS232 to USB Converter Interface |
.zip |
|
HA0106E |
Display Program Design for LCD type MCUs
|
.zip |
|
HA0107E |
HT46RB50 Thermometer
|
.zip |
|
HA0108E |
HT46RB70 USB Bulk Transfer
|
.zip |
|
HA0110E |
Using the HT46R47 in a Brushless DC Motor Speed Control Driver Application
|
.zip |
|
HA0111E |
HT46RU66 UART Transmitter/Receiver
|
.zip |
| HA0112E |
Using the Normal I/O Pins on the HT45R36/38 and HT46R322/342 to Drive LCDs
| .zip |
| HA0113E |
Using the HT45R36/38 and the HT46R322/342 I/O to implement an LED Driver
| .zip |
| HA0115E |
Using the HT45R36 and HT45R38 to implement Touch Switches
| -- |
| HA0116E |
Using the SPI in the HT82J30R for PS2 Gamepad Slave Applications
| .zip |
| HA0119E |
Using the HT45R36 I/O for Buzzer Driving
| .zip |
| HA0120E |
HT48F06E Hopping Decoder
| .zip |
| HA0121E |
HT48F06E Hopping Encoder
| .zip |
| HA0122E |
HT48F MCU Series - Using Assembly Language to Write to the 1K EEPROM Data Memory
| .zip |
| HA0123E |
HT48F MCU Series - Using C Language to Write to the 1K EEPROM Data Memory
| .zip |
| HA0124E |
HT48F MCU Series - Using Assembly Language to Write to the 2K EEPROM Data Memory
| .zip |
| HA0125E |
HT48F MCU Series - Using C Language to Write to the 2K EEPROM Data Memory
| .zip |
| HA0126E |
Nickel Cadmium and Nickel Hydride Battery Charging Applications Using the HT48R062
| .zip |
| HA0128E |
Using an I/O Port Pin as an A/D Converter Input
| .zip |
| HA0131E |
Using the HT45R38 to Implement Touch Switches in an Electronic Clock Application
| .zip |
| HA0132E |
Using the HT46R47 for LED Background Light Applications
| .zip |
| HA0133E |
Using the HT46RB50 for Battery Charger Applications
| .zip |
| HA0134E |
Using the HT46R48 in a Gas Water Heater Application
| .zip |
| HA0135E |
Using the HT45R38 for Pan Detection in Induction Cookers
| -- |
| HA0141E |
Using the HT45R3X Series Touch Switch
Devices – Switch Recognition Software IP
| .zip |
| HA0144E |
Using the HT48R062 for Temperature Sensing
in Simple Battery Charger Applications
| .zip |
| HA0145E |
Touch Switch Detection Tool Demo
Board Introduction
| .zip |
| HA0146E |
Using the HT45R38 to Measure Current and Voltage
and Power Adjustment for Electric Hotplates
| -- |
| HA0148E |
Using the HT13R90 in Simple
Charger Applications
| -- |
| HA0149E |
Using an I/O Port to Implement IIC
Communication
| .zip |
| HA0150E |
Using the HT46R46 I/O Ports to Implement
Half-Duplex SPI Communication
| .zip |
| HA0151E |
Using the HT46R46 I/O Ports to Implement
Full-Duplex SPI Communication
| .zip |
| HA0152E |
Using the HT45R35 in Touch Switch Fan Applications
| .zip |
| HA0153E |
Using the HT45R35 in Touch Switch Extractor Fan Control Applications
| .zip |
| HA0154E |
Using the HT46F47E in Digital
Photoframe Backlight Applications
| .zip |
| HA0159E |
Points to Note when Converting between the HT46F4xE and HT46R4xE Series
| -- |
| HA0160E |
Touch Switch Application Using the HT46R47
| .zip |
| HA0163E |
7-inch WLED Backlight Display Application for the HT46R47
| .zip |
| HA0164E |
Touch Key Application for Power Control using the HT45R38
| .zip |
| HA0166E |
Managing the External ERC Accuracy using the 32768Hz RTC in the HT48R54A and HT46R94
| .zip |
| HA0179E |
HT56R6x MCU Operating Mode
Introduction
| -- |
| HA0182E |
SPI Data Transmission in the HT56R678
| .zip |
| HA0186E |
HT56R6x/6xx How to Write the
Multi-Function Interrupt Service Routine
| -- |
| HA0187E |
BS808B SCD Application Example using the C Language with INTB
| .zip |
| HA0188E |
BS808B SCD Application Example using C Language with the TC0 pin
| .zip |
| HA0189E |
BS808B SCD Application Example using Assembly Language with the INTB Pin
| .zip |
| HA0191E |
Using the Data EEPROM in the HT66Fxx |
.zip |
| HA0192E |
Notes for using the LVR in the HT66Fx0 |
-- |
| HA0193E |
Using the LVD in the HT66Fx0
| -- |
| HA0194E |
Using the ADC Functions in the HT66Fx0
| .zip |
| HA0195E |
Reset Circuit Applications in the HT66Fx0
Series MCU |
-- |
| HA0197E |
HT66Fx0 Operating Modes |
-- |
| HA0198E |
Setting up the HT66Fx0 Comparator
Settings and Points to Note |
-- |
| HA0199E |
Using the SIM SPI Function in the HT66F40 |
.zip |
| HA0200E |
Using the SIM I2C Mode in the HT66F40 |
.zip |
| HA0202E |
SPI Data Transmission in the
HT45R37 using C Language |
.zip |
| HA0203E |
Generating an LCD Drive Waveform with
C in the HT46R9x, HT46R06x, HT48R06x |
.zip |
| HA0204E |
SPI Data Transmission in the
HT45R37 using Assembly Language |
.zip |
| HA0206E |
Transmitting Data Using the I2C Bus
in the HT45R37 (C Language) |
.zip |
| HA0207E |
Transmitting Data using I2C Bus in the HT45R37 (Assembly Language) |
.zip |
| HA0211E |
HT56R26 Voice Applications |
.zip |
| HA0213E |
SPI Data Transmission in the
HT56R2x and Relevant Programming |
.zip |
| HA0214E |
An Introduction to HT56R2x SCOM LCD Driving Applications |
.zip |
| HA0215E |
An Introduction to the HT56R2x
Operating Modes |
-- |
| HA0216E |
Using the I2C Mode Application Program in the HT56R2x |
.zip |
| HA0218E |
Locating Subroutines in Program Memory Bank3 in the HT56R26 |
-- |
| HA0219E |
The HT56R2x A/D Function |
.zip |
| HA0222E |
Special Notes for the HT4xR06x PA7-RESB Reset Pin Application |
-- |
| HA0225E |
How to Use the Remote Controller Carrier in the HT48RA0-5 |
-- |
| HA0226E |
How to Implement a Learning Type Remote Controller Using the HT45R22E |
.zip |
| HA0231E |
UART and SPI Data Transmission Functions using Time Sharing in the HT66FU50 |
.zip |
| HA0233E |
Voice Applications Using the HT45F23 |
.zip |
| HA0234E |
HT45F23 ADC Application Example |
.zip |
| HA0235E |
Using the Operational Amplifiers in the HT45F23 |
-- |
| HA0236E |
Comparator Applications in the HT45F23 |
-- |
| HA0238E |
Using the CTM Compare Match Output Mode in the HT66F40 |
.zip |
| HA0239E |
Using the CTM PWM Mode in the HT66F40 |
.zip |
| HA0256E |
Setting Up and Points to Note for the Comparator in the HT67F50 |
-- |
