HT48RA0-3/HT48CA0-3 -- Remote Type 8-Bit MCU

General Description

The HT48RA0-3/HT48CA0-3 are 8-bit high performance, RISC architecture microcontroller devices specifically designed for multiple I/O control product applications. The mask version HT48CA0-3 is fully pin and functionally compatible with the OTP version HT48RA0-3 device.

The advantages of low power consumption, I/O flexibility, timer functions, watchdog timer, HALT and wake-up functions, as well as low cost, enhance the versatility of this device to suit a wide range of application possibilities such as industrial control, consumer products, and particularly suitable for use in products such as infrared remote controllers and various subsystem controllers.

Features

  • Operating voltage: fSYS=4MHz(±3%) at 2.0V~3.6V,
    Temperature = 0°C ~ +50°C
  • 10 bidirectional I/O lines
  • 6 Schmitt trigger input lines
    (PB7 without Pull-high resistor)
  • One programmable carrier output - using 9-bit timer
  • On-chip RC oscillator - 4MHz ±3% when VDD=2.0V~3.6V; Temperature = 0°C ~ +50°C
  • Watchdog Timer
  • 1Kx14 program memory
  • 32x8 data RAM
  • Power-down and wake-up features reduce power
    consumption
  • 62 powerful instructions
  • Up to 1µs instruction cycle with 4MHz system clock
  • All instructions executed in 1 or 2 machine cycles
  • 14-bit table read instructions
  • One-level subroutine nesting
  • Bit manipulation instructions
  • Low voltage reset function
  • 20-pin SSOP package

Technical Document

Other Information