|
HT82A822R -- USB Audio MCU
General Description
This HT82A822R is an 8-bit high performance RISC-like microcontroller designed for USB Speaker product applications. The HT82A822R combines a 16-bit DAC, USB transceiver, SIE (Serial Interface Engine), audio class processing unit, FIFO, 8-bit MCU into a single chip. The DAC in the HT82A822R is operating at the 48kHz sampling rate. The HT82A822R has a digital programmable gain amplifier. The gain range is from -32dB to +6dB.
The HT82A822R has a Human Interface Device function that allows a user to control the playback volume at the device side. The HT82A822R also can mute the analog output signal by the operation of HID buttons.
|
Features
- USB 2.0 full speed compatible
- USB spec v1.1 full speed operation and USB audio device class spec v1.0
- Operating voltage: fSYS= 6MHz/12MHz: 3.3V~5.5V
- Low voltage reset function (3.0V±0.3V)
- High-performance 48kHz sampling rate for audio playback
- Embedded class AB power amplifier for speaker driving
- Embedded High Performance 16 bit audio DAC
- Support digital volume control
- HID support which can remote control of playback volume/mute
- 3 endpoints supported (endpoint 0 included)
- Support 1 Control , 1 Interrupt , 1 Isochronous transfer
- Total FIFO size are 400 byte (8, 8, 384 for EP0~EP2)
- 4096x15 program memory ROM
- 192x8 MCU type data memory RAM (Bank0)
- 128x8x4 Speaker Out Data RAM (Bank1, Bank2, Bank3, Bank4)
- 128x8x4 MCU Type General Purpose Data RAM (Bank5, Bank6, Bank7, Bank8)
- HALT function and wake-up feature reduce power consumption
- 24 bidirectional I/O lines (max.)
- Two 16-bit programmable timer/event counter and overflow interrupts
- Watchdog Timer
- 16-level subroutine nesting
- Bit manipulation instruction
- 15-bit table read instruction
- 63 powerful instructions
- All instructions in one or two machine cycles
- 48-pin SSOP package
|
|
|
